The chassis of the car is so important

inspection of the major assembly oil in time This includes a brake system, steering system, on the one hand, in strict accordance with the instructions on time, regular special repair service stations to supplement or replace, on the other hand to check their own observation, generally in a filling way to check, look at all between the liquid storage tank, whether in oil two lines below the line, if it should be added in time, if the oil level drops quickly, indicating the system leakage, should check out leakage location immediately, timely repair. here must point to note is the oil added to the original and the same specifications of different grades, so as to avoid oil mixed together by chemical reaction, but the deterioration of oil, self defeating. pay attention to the wear and tear of the brake disc and the clutch disc in time The two kinds of friction disc, brake disc and clutch disc, are consumables, which will be lost after a period of time and lose the original function. If you don't change it in time, it's easy to cause a car accident. The general car has a corresponding warning indicator, which will send out warning signals in time to remind the user to change. four wheel positioning is very important The crude , the four wheels on the car seems to be straight and upright on the ground, in fact, if you use the instrument to measure, will find them in X, Y, Z three plane deflected by an angle, but value is very small, usually only 0.5 to 2 degrees, the naked eye can see do not come out. Don't look down on these three small deflection angles, which determine the steering performance of the car. If the car crashes, or the time is too long for wear and tear, the maneuverability will be greatly reduced. So if you feel different when manipulating the steering wheel, you should go to the regular repair factory or the professional four round location check station to check and make the corresponding adjustment. It costs little to ensure safe driving. cars often meet rain and snow, and the chassis is easy to rust. If you use the method of salt spray snow thawing, salt water will accelerate the corrosion of steel; driving on poor road, fly wheel will stone burst up, hit the chassis. Therefore, some manufacturers recommend spraying a protective coating on the chassis to improve the anti rust capability, reduce impact damage and prolong the chassis life. but this also needs to be analyzed concretely. Now many middle and high grade cars have already used double sided galvanized steel plates, and wax injection technology has been used in the gap where water may be poured into water. Generally, it takes no more than 10 to 15 years. Some cars are covered with antirust steel plates at the bottom, avoiding the immersion of the water and reducing the aerodynamic drag. For this type of car is no longer necessary superfluous.

Return List